Configuring Ies Sap Atm Parameters - Alcatel-Lucent 7750 SR OS Service Manual

Configuring an IES Service with CLI

Configuring IES SAP ATM Parameters

Use the following CLI syntax to configure IES SAP ATM parameters.
CLI Syntax: config>service# ies service-id
The following example displays the command usage to create Apipe SAPs:
PE router 1 (A:ALA-41):
Example
PE router 2 (A:ALA-42):
Example
Page 696
interface interface-name
sap sap-id
atm
egress
traffic-desc traffic-desc-profile-id
encapsulation encapsulation-type
ingress
traffic-desc traffic-desc-profile-id
oam
alarm-cells
terminate
collect-stats
description description-string
egress
qos policy-id
scheduler-policy scheduler-policy-name
ingress
qos policy-id [shared-queuing]
scheduler-policy scheduler-policy-name
multi-service-site customer-site-name
no shutdown
:
A:ALA-41>config>service# ies 5
A:ALA-41>config>service>ies# sap 1/1/1:0/32 create
A:ALA-41>config>service>ies>sap# ingress
A:ALA-41>config>service>ies>sap>ingress# qos 102
A:ALA-41>config>service>ies>sap>ingress# exit
A:ALA-41>config>service>ies>sap# egress
A:ALA-41>config>service>ies>sap>egress# qos 103
A:ALA-41>config>service>ies>sap>egress# exit
A:ALA-41>config>service>ies>sap# no shutdown
A:ALA-41>config>service>ies>sap# exit
A:ALA-41>config>service>ies#
:
A:ALA-42>config>service# ies 5
A:ALA-42>config>service>ies# sap 2/2/2:0/32 create
A:ALA-42>config>service>ies>sap# ingress
A:ALA-42>config>service>ies>sap>ingress# qos 102
A:ALA-42>config>service>ies>sap>ingress# exit
7750 SR OS Services Guide