Alcatel-Lucent 7750 SR OS Service Manual page 497

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Description
When this command is enabled, packets received on a SAP or or a spoke SDP with an unknown
source MAC address will be dropped only if the maximum number of MAC addresses for that SAP or
spoke SDP (see
set for the SAP or spoke SDP, enabling discard-unknown-source has no effect.
When disabled, the packets are forwarded based on the destination MAC addresses.
The no form of this command causes packets with an unknown source MAC addresses to be
forwarded by destination MAC addresses in VPLS.
Default
no discard-unknown
limit-mac-move
Syntax
limit-mac-move [blockable | non-blockable]
no limit-mac-move
Context
config>service>vpls>sap
config>service>vpls>spoke-sdp
Description
This command indicates whether or not the mac-move agent, when enabled using
config>service>vpls>mac-move or config>service>epipe>mac-move, will limit the MAC re-learn
(move) rate on this SAP.
Default
SAPs and spoke SDPs are blockable
Parameters
blockable — The agent will monitor the MAC re-learn rate on the SAP, and it will block it when the
non-blockable — When specified, this SAP will not be blocked, and another blockable SAP will be
mac-pinning
Syntax
[no] mac-pinning
Context
config>service>vpls>sap
config>service>vpls>spoke-sdp
config>service>vpls>mesh-sdp
Description
Enabling this command will disable re-learning of MAC addresses on other SAPs within the VPLS.
The MAC address will remain attached to a given SAP for duration of its age-timer.
The age of the MAC address entry in the FIB is set by the age timer. If mac-aging is disabled on a
given VPLS service, any MAC address learned on a SAP/SDP with mac-pinning enabled will
remain in the FIB on this SAP/SDP forever.
Every event that would otherwise result in re-learning will be logged (MAC address; original-SAP;
new-SAP).
Note that MAC addresses learned during DHCP address assignment (DHCP snooping enabled) are
not impacted by this command. MAC-pinning for such addresses is implicit.
Default
When a SAP or spoke SDP is part of a Residential Split Horizon Group (RSHG), MAC pinning is
activated at creation of the SAP. Otherwise MAC pinning is not enabled by default.
7750 SR OS Services Guide
max-nbr-mac-addr on page
re-learn rate is exceeded.
blocked instead.
Virtual Private LAN Services
498) has been reached. If max-nbr-mac-addr has not been
Page 497

Advertisement

Table of Contents
loading

Table of Contents