If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters
ip-int-name | ip-addr — The IP interface name or IP interface address.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
fdb
Syntax
fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-
id}
Context
clear>service>id
Description
Clears FDB entries for the service.
Parameters
all — Clears all FDB entries.
mac ieee-address — Clears only FDB entries in the FDB table with the specified 48-bit MAC
sap sap-id — Clears the specified SAP information.
7750 SR OS Services Guide
Default
All IP interfaces.
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Values sap-id:
null
dot1q
qinq
atm
frame
cisco-hdlc slot/mda/port.channel
port-id
aps-id
bundle-type-slot/mda.bundle-num
bpgrp-id:
ccag-id
lag-id
[port-id | bundle-id | bpgrp-id | lag-id | aps-id]
[port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
[port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
[port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
[port-id | bundle-id]:dlci
slot/mda/port[.channel]
aps-group-id[.channel]
aps
keyword
group-id
1 — 64
bundle
keyword
type
ima, ppp
bundle-num 1 — 128
bpgrp-type-bpgrp-num
bpgrp
keyword
type
ima
bpgrp-num 1 — 1280
ccag-id.path-id[cc-type]:cc-id
ccag
keyword
id
1 — 8
path-id
a, b
cc-type
.sap-net, .net-sap]
cc-id
0 — 4094
lag-id
lag
keyword
id
1 — 200
Internet Enhanced Services
Page 849