Alcatel-Lucent 7750 SR OS Service Manual page 500

VPLS Service Configuration Commands
range
Syntax [no] range vlan-range
Context config>service>vpls>sap>managed-vlan-list
Description
This command configures a range of VLANs on an access port that are to be managed by an existing
management VPLS.
This command is only valid when the VPLS in which it is entered was created as a management
VPLS, and when the SAP in which it was entered was created on an Ethernet port with encapsulation
type of dot1q or qinq, or on a Sonet/SDH port with encapsulation type of bcp-dot1q.
To modify the range of VLANs, first the new range should be entered and afterwards the old range
removed. See
Default
None
Parameters
vlan-range — Specify the VLAN start value and VLAN end value. The end-vlan must be greater than
Page 500
Modifying VPLS Service Parameters on page
start-vlan. The format is <start-vlan>-<end-vlan>
Values
start-vlan: 0 — 4094
end-vlan: 0 — 4094
436.
7750 SR OS Services Guide