Alcatel-Lucent 7750 SR OS Service Manual page 766

IES Service Configuration Commands
port-id — Specifies the physical port ID in the slot/mda/port format.
bundle-id — Specifies the multilink bundle to be associated with this IP interface. The bundle key-
bgprp-id — Specifies the bundle protection group ID to be associated with this IP interface. The
Page 766
ccag-id
lag-id
qtag1
qtag2
vpi
vci
dlci
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example 6/2/3 specifies port 3 on MDA 2
in slot 6.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period "." separates the
physical port from the channel-id. The port must be configured as an access port.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
word must be entered at the beginning of the parameter.
The command syntax must be configured as follows:
bundle-id: bundle-type-slot-id/mda-slot.bundle-num
bundle-id value range: 1 — 128
For example:
*A:ALA-12>config#
*A:ALA-12>config>port# multilink-bundle
bpgrp keyword must be entered at the beginning of the parameter.
The command syntax must be configured as follows:
bpgrp-id:
type:
bpgrp-num value range:
For example:
*A:ALA-12>config# port bpgrp-ima-1
*A:ALA-12>config>service>vpls$ sap bpgrp-ima-1
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id
lag keyword
id 1 — 200
0 — 4094
*, 0 — 4094
NNI 0 — 4095
UNI 0 — 255
1, 2, 5 — 65535
16 — 1022
port bundle-ppp-5/1.1
bpgrp-type-bpgrp-num
ima
1 — 1280
7750 SR OS Services Guide