Alcatel-Lucent 7750 SR OS Service Manual page 887

Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
secondary
static-arp
no shutdown
Configure VPRN interface SAP parameters
config>service>vprn>interface>sap
accounting-policy
anti-spoof
collect-stats
description
ingress
multi-service-site
tod-suite
Configure SAP egress parameters
config>service>vprn>if>sap>egress
filter
qos
queue-override
queue
adaptation-rule
cbs
high-prio-only
mbs
rate
scheduler-override
7750 SR OS Services Guide
Assigns a secondary IP address, IP subnet, and broadcast address
format to an IP interface.
Configures a static address resolution protocol (ARP) entry associating
a subscriber IP address with a MAC address for the router instance.
Enables the VPRN interface.
Specifies the accounting policy to apply to the SAP.
Enables anti-spoof filtering and optionally changes the anti-spoof
matching type for the interface.
Enables the collection of accounting and statistical data for the SAP or
network port
Creates a text description stored in the configuration file for the SAP.
Enables a context to configure ingress SAP Quality of Service (QoS)
policies and filter policies.
Creates a new customer site or edits an existing customer site with the
customer-site-name parameter.
Applies a time-based policy (filter or QoS policy) to the SAP.
Associates an IP filter policy or MAC filter policy with an egress SAP
or IP interface.
Associates a Quality of Service (QoS) policy with an egress SAP or IP
interface.
Enables the context to configure override values for the specified SAP
egress QoS queue.
Specifies the ID of the queue whose parameters are to be overridden.
Specifies attributes of the specified queue's adaptation rule parameters.
Specifies attributes of the specified queue's CBS parameters.
Specifies attributes of the specified queue's high-prio-only parameters.
Specifies attributes of the specified queue's MBS parameters.
Specifies attributes of the queue's Peak Information Rate (PIR) and the
Committed Information Rate (CIR) parameters.
Specifies the set of attributes whose values have been overridden via
management on this virtual scheduler.
Virtual Private Routed Network Services
Description Page
983
984
951
917
1004
1009
1004
952
1006
1022
1003
1016
1020
1023
1023
1023
1026
1026
1027
1028
1029
Page 887