Alcatel-Lucent 7750 SR OS Service Manual page 1170

VPRN Service Configuration Commands
Page 1170
Label
Authentication
Next Hop Self
AggregatorID Zero
Remove Private
Passive
Prefix Limit
Hold Time
Keep Alive
Active Hold Time
Active Keep Alive
Cluster Id
Client Reflect
Preference
Num of Flaps
None — No authentication is configured.
MD5 — MD5 authentication is configured.
Disabled — BGP is not configured to send only its own IP
address as the BGP nexthop in route updates to the specified neigh-
bor.
Enabled — BGP will send only its own IP address as the BGP
nexthop in route updates to the neighbor.
Disabled — The BGP Neighbor is not configured to set the
aggregator ID to 0.0.0.0 in all originated route aggregates.
Enabled — The BGP Neighbor is configured to set the aggregator
ID to 0.0.0.0 in all originated route aggregates.
Disabled — BGP will not remove all private AS numbers from
the AS path attribute, in updates sent to the specified neighbor.
Enabled — BGP will remove all private AS numbers from the AS
path attribute, in updates sent to the specified neighbor.
Disabled — BGP will actively attempt to establish a BGP con-
nection with the specified neighbor.
Enabled — BGP will not actively attempt to establish a BGP con-
nection with the specified neighbor.
No Limit — No route limit assigned to the BGP peer group.
1 - 4294967295 — The maximum number of routes BGP can
learn from a peer.
The configured hold time setting.
The configured keepalive setting.
The negotiated hold time, if the BGP neighbor is in an established
state.
The negotiated keepalive time, if the BGP neighbor is in an estab-
lished state.
None — No cluster ID has been configured
The configured route reflector cluster ID.
Disabled — The BGP route reflector is configured not to reflect
routes to this neighbor.
Enabled — The BGP route reflector is configured to reflect routes
to this neighbor.
The configured route preference value for the peer group.
The number of flaps in the neighbor connection.
7750 SR OS Services Guide
Description