Alcatel-Lucent 7750 SR OS Service Manual page 1360

Configuration Commands
Port Type Encap-Type
Ethernet Null
Ethernet Dot1q
Ethernet QinQ
SONET/SDH IPCP
SONET/SDH BCP-Null
TDM
SONET/SDH BCP-Dot1q
TDM
SONET/SDH Frame Relay
TDM
SONET/SDH ATM
ATM
channel-id — The SONET/SDH or TDM channel on the port of the SAP. A period separates the phys-
egress — Specifies that packets egressing the SAP should be mirrored. Egress packets are mirrored
ingress — Specifies that packets ingressing the SAP should be mirrored. Ingress packets are mirrored
Page 1362
Values
qtag1:
qtag2 :
The values depends on the encapsulation type configured for the interface. The following table
describes the allowed values for the port and encapsulation types..
Allowed Values
0
0 — 4094
qtag1: 0 — 4094
qtag2: 0 — 4094
-
0
0 — 4094
16 — 991
vpi (NNI) 0 — 4095
vpi (UNI) 0 — 255
vci 1, 2, 5 — 65535
ical port from the channel-id. The port must be configured as an access port.
to the mirror destination after egress packet modification.
to the mirror destination prior to ingress packet modification.
0 — 4094
* | 0 — 4094
The SAP is identified by the port.
The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
The SAP is identified by the 802.1Q tag on the channel.
The SAP is identified by the data link connection
identifier (DLCI).
The SAP is identified by the PVC identifier (vpi/vci).
7750 SR OS Services Guide
Comments