Alcatel-Lucent 7750 SR OS Service Manual page 1430

OAM and SAA Command Reference
address} | {interface interface-name} | bypass-routing] [count requests] [do-not-frag-
ment] [router router-instance] [timeout timeout]
Context config>saa>test>type
Description
This command configures an ICMP traceroute test.
Parameters
ip-address — The far-end IP address to which to send the svc-ping request message in dotted decimal
dns-name — The DNS name of the far-end device to which to send the svc-ping request message,
rapid — Packets will be generated as fast as possible instead of the default 1 per second.
detail — Displays detailed information.
ttl time-to-live — The TTL value for the MPLS label, expressed as a decimal integer.
tos type-of-service — Specifies the service type.
size bytes — The request packet size in bytes, expressed as a decimal integer.
pattern pattern — The date portion in a ping packet will be filled with the pattern value specified. If
source ip-address|dns-name — Specifies the IP address to be used.
interval seconds — This parameter is used to override the default request message send interval and
Page 1432
notation.
Values
ipv4-address:
ipv6-address:
expressed as a character string up to 63 characters maximum.
Values
ipv6-address:
addresses)
Values
1 — 128
Values
0 — 255
Values
0 — 16384
not specified, position info will be filled instead.
Values
0 — 65535
Values
ipv4-address:
ipv6-address:
defines the minimum amount of time that must expire before the next message request is sent.
a.b.c.d
x:x:x:x:x:x:x:x
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0 — FFFF]H
d: [0 — 255]D
interface (32 chars max, mandatory for link local
a.b.c.d
x:x:x:x:x:x:x:x
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]Ddns-name:128 characters max
7750 SR OS Services Guide