Oam Saa Commands - Alcatel-Lucent 7750 SR OS Service Manual

OAM SAA Commands

saa
Syntax saa test-name [owner test-owner] {start | stop}
Context oam
Description
Use this command to start or stop an SAA test.
test-name — Name of the SAA test. The test name must already be configured in the config>saa>test
owner test-owner — Specifies the owner of an SAA operation up to 32 characters in length.
start — This keyword starts the test. A test cannot be started if the same test is still running.
stop — This keyword stops a test in progress. A test cannot be stopped if it is not in progress. A log
7750 SR OS Services Guide
context.
Values
If a test-owner value is not specified, tests created by the CLI have a default owner
"TiMOS CLI".
A test cannot be started if it is in a shut-down state. An error message and log event will be
generated to indicate a failed attempt to start an SAA testrun.
message will be generated to indicate that an SAA testrun has been aborted.
OAM and SAA Command Reference
Page 1453