Alcatel-Lucent 7750 SR OS Service Manual page 1456

OAM and SAA Command Reference
Syntax path-probing
Context config>test-oam>ldp-treetrace
Description
This command enables the context to configure path probing paramters.
interval
Syntax interval minutes
no interval
Context
config>test-oam>ldp-treetrace>path-probing
Description
This command configures the number of minutes to wait before repeating probing (pinging) a
discovered path.
Default
1
Parameters
minutes — Specifies the number of minutes to probe all active ECMP paths for each LSP
retry-count
Syntax retry-count retry-count
Context config>oam-test>ldp-treetrace>path-discovery
config>oam-test>ldp-treetrace>path-probing
Description
This command configures the path probing maximum number of failures.
Default 3
Parameters
retry-count — Specifies the maximum number of consecutive timeouts allowed before failing a path
timeout
Syntax timeout timeout
no timeout
Context config>test-oam>ldp-treetrace>path-probing
Description
This command is used to override the default timeout value and is the amount of time that the router
will wait for a message reply after sending the message request. Upon the expiration of message
timeout, the requesting router assumes that the message response will not be received. Any response
received after the request times out will be silently discarded.
Default
1
Page 1458
Values
1 — 60
probe (ping).
Values
1 — 255
7750 SR OS Services Guide