Alcatel-Lucent 7750 SR OS Service Manual page 1196

VPRN Service Configuration Commands
Timeout Timer
Counter
------------------------------------------------------------------------------
Updates Sent
Triggered Updates
Bad Packets Received
RIPv1 Updates Received
RIPv1 Updates Ignored
RIPv1 Bad Routes
RIPv1 Requests Received
RIPv1 Requests Ignored
RIPv2 Updates Received
RIPv2 Updates Ignored
RIPv2 Bad Routes
RIPv2 Requests Received
RIPv2 Requests Ignored
Authentication Errors
==============================================================================
*A:ALA-12#
route-table
Syntax route-table [ip-prefix [/mask] [longer] | [protocol protocol] | [summary]]
Context show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
ip-prefix[/mask] — Displays routes only matching the specified ip-prefix and optional mask.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
protocol protocol — Displays routes learned from the specified protocol.
summary — Displays a route table summary information.
Output Standard Show Route Table Output — The following table describes the standard output fields
for the route table.
Page 1196
: 180
Values
bgp, isis, local, ospf, rip, static, aggregate
Label
Dest Address
Next Hop
Type
Protocol
Age
Metric
Flush Timer
Total
0
0
0
0
0
0
0
0
0
0
0
0
0
0
The route destination address and mask.
The next hop IP address for the route destination.
Local — The route is a local route.
Remote — The route is a remote route.
The protocol through which the route was learned.
The route age in seconds for the route.
The route metric value for the route.
7750 SR OS Services Guide
: 120
Last 5 Min Last 1 Min
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Description