Common Configuration Tasks - Alcatel-Lucent 7750 SR OS Service Manual

Common Configuration Tasks

Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure both local
and remote mirror services and provides the CLI command syntax. Note that local and remote
mirror source and mirror destination components must be configured under the same service ID
context.
Each local mirrored service
configurations:
1. Specify mirror destination (SAP, SDP).
2. Specify mirror source (port, SAP, SDP, IP filter, MAC filter, ingress label).
Page 1322
(Figure 68) (within the same router) requires the following
Mirror Source
1/1/2
1/1/1 1/1/2
Figure 2: Local Mirrored Service Tasks
ALA-A
Mirror Destination
1/1/3
1/1/3
7750 SR OS Services Guide
Sniffer
OSSG028A