Alcatel-Lucent 7750 SR OS Service Manual page 1239

Table 1: CLI Commands to Configure VSM Parameters (Continued)
Command
mac
mtu
egress
ingress
pool
resv-cbs
slope-policy
accounting-policy
collect-stats
queue-policy
rate
weight
Configure VSM on an MDA
config>card>mda
mda
Configure CCAG on a router interface port
config>router>interface>port
port
Configure CCAG on an Epipe service
config>service>epipe service-id
sap
Configure CCAG on a VPLS service
config>service>vpls service-id
sap
7750 SR OS Services Guide
Overrides the default MAC address for the path's context.
Overrides the default port level MTU for the path's context.
Changes the current CLI context to the path's egress context.
Changes the current CLI context to the path's ingress context.
Changes the current CLI context to the path's nodal context.
Defines the percentage of the buffer pool that is considered reserved for the
CBS buffer allocation for queues created in the path's pool context.
Defines the slope policy used to mange the shared portion of the buffer
pools WRED slopes.
Defines the network accounting policy that will be used to define which
statistics will be collected when the collect-stats command is enabled in
the path's net-sap context.
Enables collecting stats on the path's net-sap context.
Defines the egress network queues used by IP interfaces bound to the
path's context
Defines a specific bandwidth rate limitation for the alpha or beta paths on
each member CCA in the CCAG.
Defines a scheduling weight to the aggregate output of the alpha and beta
paths.
Provisions an adaptor into an MDA position on an IOM slot.
Cross connects a network IP interface to a CCAG SAP using the referenced
ccag-id.
Creates a cross connect SAP on the ccag-id referenced in the Epipe service.
Creates a cross connect SAP on the ccag-id referenced in the VPLS
service.
Versatile Service Module
Description Page
1278
1278
1279
1280
1279
1279
1280
1282
1282
1283
1276
1277
1285
1286
1288
1289
Page 1241