Alcatel-Lucent 7750 SR OS Service Manual page 1414

OAM and SAA Command Reference
source src-ip — The IP prefix for the source IP address in dotted decimal notation.
fc-name — The forwarding class of the MPLS echo request encapsulation.
profile {in | out} — The profile state of the MPLS echo request encapsulation.
destination dst-ip — The IP prefix for the destination IP address in dotted decimal notation.
size octets — The OAM request packet size in octets, expressed as a decimal integer.
min-ttl vc-label-ttl — The minimum TTL value in the VC label for the trace test, expressed as a
max-ttl vc-label-ttl — The maximum TTL value in the VC label for the trace test, expressed as a
return-control — Specifies the OAM reply to a data plane OAM request be sent using the control
probe-count send-count — The number of OAM requests sent for a particular TTL value, expressed
interval seconds — The interval parameter in seconds, expressed as a decimal integer. This
timeout timeout — The timeout parameter in seconds, expressed as a decimal integer. This value is
Page 1416
Values
0.0.0.0 — 255.255.255.255
Default
be
Values
be, l2, af, l1, h2, ef, h1, nc
Default
out
Values
0.0.0.0 — 255.255.255.255
decimal integer.
Default
1
Values
1 — 255
decimal integer.
Default
4
Values
1 — 255
plane instead of the data plane.
Default
OAM reply sent using the data plane.
as a decimal integer.
Default
1
Values
1 — 10
parameter is used to override the default request message send interval and defines the minimum
amount of time that must expire before the next message request is sent.
If the interval is set to 1 second where the timeout value is set to 10 seconds, then the maximum
time between message requests is 10 seconds and the minimum is 1 second. This depends upon
the receipt of a message reply corresponding to the outstanding message request.
Default
1
Values
1 — 10
used to override the default timeout value and is the amount of time that the router will wait for
a message reply after sending the message request. Upon the expiration of message timeout, the
requesting router assumes that the message response will not be received. Any response received
after the request times out will be silently discarded.
7750 SR OS Services Guide