Alcatel-Lucent 7750 SR OS Service Manual page 1402

OAM and SAA Command Reference
Unlike sdp-ping, only a single message will be sent per command; no count nor interval parameter is
supported and round trip time is not calculated. A timeout value of 10 seconds is used before failing
the request. The forwarding class is assumed to be Best-Effort Out-of-Profile
If no request is sent or a reply is not received, all remote information will be shown as N/A.
To terminate a svc-ping in progress, use the CLI break sequence <Ctrl-C>.
Upon request timeout, message response, request termination, or request error the following local and
remote information will be displayed. Local and remote information will be dependent upon service
existence and reception of reply.
Field
Request Result
Service-ID
Local Service Type
Local Service Admin
State
Local Service Oper State
Page 1404
Description
The result of the svc-ping request message.
The Service-ID being tested.
The type of service being tested. If service-id does not exist
locally, N/A is displayed.
The local administrative state of service-id. If the service does
not exist locally, the administrative state will be Non-Existent.
The local operational state of service-id. If the service does not
exist locally, the state will be N/A.
Sent - Request Timeout
Sent - Request Terminated
Sent - Reply Received
Not Sent - Non-Existent
Service-ID
Not Sent - Non-Existent
SDP for Service
Not Sent - SDP For Service
Down
Not Sent - Non-existent
Service Egress Label
service-id
Epipe, Ipipe, Fpipe, Apipe
TLS
IES
Mirror-Dest
N/A
Admin-Up
Admin-Down
Non-Existent
Oper-Up
Oper-Down
N/A
7750 SR OS Services Guide
Values