Alcatel-Lucent 7750 SR OS Service Manual page 1202

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

VPRN Service Configuration Commands
IP Addr/mask
------------------------------------------------------------------------------
192.168.254.0/24
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-route next-hop 10.10.0.254
==============================================================================
Route Table
==============================================================================
IP Addr/mask
------------------------------------------------------------------------------
192.168.253.0/24
=============================================================================
*A:ALA-12#
tunnel-table
Syntax
tunnel-table [ip-address[/mask] [protocol protocol | sdp sdp-id]
tunnel-table [summary]
Context
show>router
Description
This command displays tunnel table information.
Note that auto-bind GRE tunnels are not displayed in show command output. GRE tunnels are not the
same as SDP tunnels that use the GRE encapsulation type. When the auto-bind command is used
when configuring a VPRN service, it means the MP-BGP NH resolution is referring to core routing
instance for IP reachability. For a VPRN service this object specifies the lookup to be used by the
routing instance if no SDP to the destination exists.
Parameters
[ip-address[/mask]] — Displays the specified tunnel table's destination IP address and mask.
protocol protocol — Displays LDP protocol information.
sdp sdp-id — Displays information pertaining to the specified SDP.
summary — Displays summary tunnel table information.
Output
Show Tunnel Table Output — The following table describes tunnel table output fields:
Page 1202
Pref Metric Type Nexthop
4
Pref Metric Type Nexthop
5
Label
Destination
Owner
Encap
Tunnel ID
Pref
Nexthop
1
BH
black-hole
1
NH
10.10.0.254
The route's destination address and mask.
Specifies the tunnel owner.
Specifies the tunnel's encapsulation type.
Specifies the tunnel (SDP) identifier.
Specifies the route preference for routes learned from the configured
peer(s).
The next hop for the route's destination.
7750 SR OS Services Guide
Interface
n/a
Interface
n/a
Description
Active
Y
Active
N

Advertisement

Table of Contents
loading

Table of Contents