Alcatel-Lucent 7750 SR OS Service Manual page 886

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Configuring a VPRN Service with CLI
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
static
address
hash-mask-len
priority
group-range
holdtime
group-prefix
no shutdown
Configure VPRN interface parameters
config>service>vprn>interface
address
allow-directed-
broadcast
arp-populate
arp-timeout
authentication-policy
bfd
cflowd
description
dhcp
host
local-proxy-arp
loopback
mac
proxy-arp
Page 886
Enables access to the context to configure a static rendezvous point
(RP) of a PIM-SM protocol instance.
Configures the static rendezvous point (RP) address.
Configure the length of a mask that is to be combined with the group
address before the hash function is called.
Configures the priority used to become the rendezvous point (RP).
Configures the group address or range of group addresses for which
this router can be the rendezvous point (RP).
Configures the length of time neighboring routers consider this router
to be up.
Configures the multicast group-address prefix which contains
multicast group-addresses that are imbedded in the join or prune packet
as a filter criterion.
Administratively enables the RP BSR or rendezvous point (RP)
candidate.
Assigns the primary IP address, IP subnet, and broadcast address
format to an IP interface.
Enables directed broadcast forwarding out of the IP interface.
Enables populating static and dynamic hosts into the system ARP
cache.
Configures the minimum time, in seconds, an ARP entry learned on the
IP interface is stored in the ARP table.
Configures the authentication policy for this policy.
Specifies the bi-directional forwarding parameters for the IP interface.
Configures cflowd collection and analysis on the (routeable) interface.
Creates a text description for the interface.
Enables the context to configure DHCP parameters.
Configures one or more hosts on this SAP.
Enables local proxy ARP on an interface.
Configures the interface as a loopback interface. This command cannot
be issued if a SAP is defined on the interface.
Assigns a specific MAC address to an IP interface.
Configures a proxy ARP policy for the interface.
Description
7750 SR OS Services Guide
Page
1060
1060
1058
1058
1059
1059
1061
951
915
978
980
1009
1010
1011
980
981
952
987
1013
981
981
982
982

Advertisement

Table of Contents
loading

Table of Contents