Alcatel-Lucent 7750 SR OS Service Manual page 1113

Port Type Encap-Type
Ethernet Null
Ethernet Dot1q
Ethernet QinQ
SONET/SDH IPCP
SONET/SDH BCP-Null
TDM
SONET/SDH BCP-Dot1q
TDM
SONET/SDH Frame Relay
TDM
SONET/SDH ATM
ATM
interface — Specifies matching SAPs with the specified IP interface.
ip-addr — The IP address of the interface for which to display matching SAPs.
ip-int-name — The IP interface name for which to display matching SAPs.
authentication-policy policy name — Specifies an existing authentication policy.
Output Show Service SAP — The following table describes show service SAP output fields:
7750 SR OS Services Guide
Values
qtag1:
qtag2 :
The values depends on the encapsulation type configured for the interface. The following table
describes the allowed values for the port and encapsulation types.
Allowed Values
0
0 — 4094
qtag1: 0 — 4094
qtag2: 0 — 4094
-
0
0 — 4094
16 — 991
vpi (NNI) 0 — 4095
vpi (UNI) 0 — 255
vci 1, 2, 5 — 65535
Values
1.0.0.0 — 223.255.255.255
Label
Port ID
Svc ID
SapMTU
I.QoS
Virtual Private Routed Network Services
0 — 4094
* | 0 — 4094
The SAP is identified by the port.
The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
The SAP is identified with a single service on the chan-
nel. Tags are assumed to be part of the customer packet
and not a service delimiter.
The SAP is identified by the 802.1Q tag on the channel.
The SAP is identified by the data link connection iden-
tifier (DLCI).
The SAP is identified by the PVC identifier (vpi/vci).
The ID of the access port where the SAP is defined.
The service identifier.
The SAP MTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
Comments
Description
Page 1113