Alcatel-Lucent 7750 SR OS Service Manual page 1287

:cc-id — The :cc-id portion of the CCAG SAP identifier is required and specifies the unique cc-id in
create — Explicitly indicates that the specified CCAG SAP is being created by the sap command.
sap
Syntax sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id [create]
no sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id
Context config>service>vpls
Description
This command creates a cross connect SAP on the ccag-id referenced in the VPLS service. A CCAG
SAP is identified by four items; the ccag-id, the CCAG path, the pairing type and the cc-id. A VPLS
CCAG SAP supports all the available QoS, filtering and accounting features as a VPLS Dot1Q SAP.
The no form of the command removes a SAP from a service context. Once removed, all information
and resources concerning the SAP is deleted from the system including the CCAG cc-id in use on the
CCA path.
Parameters
ccag — The ccag portion of the SAP identifier is required and specifies that the vpls SAP is of the
7750 SR OS Services Guide
.sap-net is not specified, .sap-sap is assumed and does not need to be included in the SAP
identification. When specified, the leading period must be used as a separator between the path
designator and the pairing type.
Values
.sap-net or .sap-sap
Default
.sap-sap
use by the CCAG SAP and the cross connect object on the other path.
Values
1 to 4094
Default
None
Handling the inclusion or exclusion state of the create keyword is dependent on the system
environment variable create.
When the system environment variable create is enabled, the system requires the explicit use of
the create keyword when creating objects such as SAPs. If the keyword is not included and the
specified CCAG SAP has not already been created, an error will occur and the CLI will not
change context to the specified CCAG SAP instance. This is designed to prevent the inadvertent
creation of a CCAG SAP in the event where the wrong CCAG SAP identifier is specified during
an attempt to edit an existing CCAG SAP. If the create keyword is specified, the CCAG SAP
will be created if it does not already exist or if it does exist, the CLI context will change to the
specified CCAG SAP.
When the system environment variable create is disabled (using the no create command), the
system will not require the create keyword when creating a CCAG SAP. In the event that the sap
command is issued with a CCAG SAP identifier that previously had not been created, that
CCAG SAP will be created.
Once a CCAG SAP has been created, the create keyword is ignored when a sap command is
executed with that CCAG SAP identifier and the CLI context will change to the specified CCAG
SAP.
CCAG type.
Versatile Service Module
Page 1289