Alcatel-Lucent 7750 SR OS Service Manual page 479

"|". If no keyword is configured, then the circuit-id suboption will not be part of the information
option (Option 82).
If disabled, the circuit-id suboption of the DHCP packet will be left empty.
Default
no circuit-id
Parameters
ascii-tuple — Specifies that the ASCII-encoded concatenated tuple consisting of the access-node-
vlan-ascii-tuple — Specifies that the format will include VLAN-id and dot1p bits in addition to what
remote-id
Syntax [no] remote-id [mac | string string]
Context config>service>vpls>sap>dhcp>option
Description
This command specifies what information goes into the remote-id suboption in the DHCP Relay
packet.
If disabled, the remote-id suboption of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
Default
no remote-id
Parameters
mac — This keyword specifies the MAC address of the remote end is encoded in the suboption.
string string — Specifies the remote-id.
vendor-specific-option
Syntax [no] vendor-specific-option
Context config>service>vpls>sap>dhcp>option
config>service>ies>if>dhcp>option
Description
This command configures the vendor specific suboption of the DHCP relay packet.
client-mac-address
Syntax [no] client-mac-address
Context config>service>vpls>sap>dhcp>option>vendor
Description
This command enables the sending of the MAC address in the vendor specific suboption of the
DHCP relay packet.
The no form of the command disables the sending of the MAC address in the vendor specific
suboption of the DHCP relay packet.
7750 SR OS Services Guide
identifier, service-id, and interface-name is used.
is included in ascii-tuple already. The format is supported on dot1q and and qinq encapsulated
ports only. Thus, when the Option 82 bits are stripped, dot1p bits will be copied to the Ethernet
header of an outgoing packet.
Virtual Private LAN Services
Page 479