Alcatel-Lucent 7750 SR OS Service Manual page 1425

jitter-event
Syntax jitter-event rising-threshold threshold [falling-threshold threshold] [direction]
no jitter-event
Context config>saa>test
Description
Specifies that at the termination of an SAA test probe, the calculated jitter value is evaluated against
the configured rising and falling jitter thresholds. SAA threshold events are generated as required.
The configuration of jitter event thresholds is optional.
Parameters
rising-threshold threshold — Specifies a rising threshold jitter value. When the test run is
falling-threshold threshold — Specifies a falling threshold jitter value. When the test run is
direction — Specifies the direction for OAM ping responses received for an OAM ping test run.
latency-event
Syntax latency-event rising-threshold threshold [falling-threshold threshold] [direction]
no latency-event
Context
config>saa>test
Description
Specifies that at the termination of an SAA test probe, the calculated latency event value is evaluated
against the configured rising and falling latency event thresholds. SAA threshold events are generated
as required.
The configuration of latency event thresholds is optional.
7750 SR OS Services Guide
completed, the calculated jitter value is compared to the configured jitter rising threshold. If the
test run jitter value is greater than the configured rising threshold value then an SAA threshold
event is generated. The SAA threshold event is tmnxOamSaaThreshold, logger application
OAM, event #2101.
Default
0
Values
0 — 2147483647 milliseconds
completed, the calculated jitter value is compared to the configured jitter falling threshold. If the
test run jitter value is greater than the configured falling threshold value then an SAA threshold
event is generated. The SAA threshold event is tmnxOamSaaThreshold, logger application
OAM, event #2101.
Default
0
Values
0 — 2147483647 milliseconds
Values
inbound — Monitor the value of jitter calculated for the inbound, one-way, OAM
ping responses received for an OAM ping test run.
outbound — Monitor the value of jitter calculated for the outbound, one-way,
OAM ping requests sent for an OAM ping test run.
roundtrip — Monitor the value of jitter calculated for the round trip, two-way,
OAM ping requests and replies for an OAM ping test run.
Default
roundtrip
OAM and SAA Command Reference
Page 1427