Alcatel-Lucent 7750 SR OS Service Manual page 741

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

mac mac-address — Specify this optional parameter when defining a static host. The MAC address
subscriber sub-ident-string — Specify this optional parameter to specify an existing subscriber
sub-profile sub-profile-name — Specify this optional parameter to specify an existing subscriber
sla-profile sla-profile-name — Specify this optional parameter to specify an existing SLA profile
ancp-string ancp-string — Specifies the ASCII string of the DSLAM circuit ID name.
7750 SR OS Services Guide
must be specified for anti-spoof ip-mac and arp-populate. Multiple static hosts may be
configured with the same MAC address given that each definition is distinguished by a unique IP
address.
identification profile to be associated with the static subscriber host. The subscriber identification
profile is configured in the config>subscr-mgmt>sub-ident-policy context. The subscriber
information is used by the VPRN SAP arp-reply-agent to determine the proper handling of
received ARP requests from subscribers.
For VPRN SAPs with
static subscriber host's sub-ident-string is used to determine whether an ARP request
received on the SAP is sourced from a host belonging to the same subscriber as the
destination host. When both the destination and source hosts from the ARP request are
known on the SAP and the subscriber identifications do not match, the ARP request may be
forwarded to the rest of the VPRN destinations.
If the static subscriber host's sub-ident string is not defined, the host is not considered to
belong to the same subscriber as another host on the SAP.
If source or destination host is unknown, the hosts are not considered to belong to the same
subscriber. ARP messages from unknown hosts are subject to anti-spoof filtering rules
applied at the SAP.
If sub-ident is not enabled on the SAP arp-reply-agent, subscriber identification matching is
not performed on ARP requests received on the SAP.
ARP requests are never forwarded back to the same SAP or within the receiving SAP's Split
Horizon Group.
profile name to be associated with the static subscriber host. The subscriber profile is configured
in the config>subscr-mgmt>sub-profile context.
name to be associated with the static subscriber host. The SLA profile is configured in the
config>subscr-mgmt>sla-profile context.
enabled with the optional sub-ident parameter, the
arp-reply-agent
Internet Enhanced Services
Page 741

Advertisement

Table of Contents
loading

Table of Contents