Alcatel-Lucent 7750 SR OS Service Manual page 1158

VPRN Service Configuration Commands
*A:ALA-12# show router 3 aggregate
==============================================================================
Aggregates (Service: 3)
==============================================================================
Prefix
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No. of Aggregates: 0
-----------------------------------------------------------
*A:ALA-12#
arp
Syntax arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context show>router
Description
This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters
ip-addr — Only displays ARP entries associated with the specified IP address.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
Output ARP Table Output — The following table describes ARP table output fields:
Sample Output
*A:ALA-12# show router 3 arp
===============================================================================
ARP Table (Service: 3)
===============================================================================
IP Address
Page 1158
Summary
Label
IP Address
MAC Address
Expiry
Type
Interface
No. of ARP Entries
MAC Address
AS Set Aggr AS
The IP address of the ARP entry.
The MAC address of the ARP entry.
The age of the ARP entry.
Dyn — The ARP entry is a dynamic ARP entry.
Inv — The ARP entry is an inactive static ARP entry (invalid).
Oth — The ARP entry is a local or system ARP entry.
Sta — The ARP entry is an active static ARP entry.
The IP interface name associated with the ARP entry.
The number of ARP entries displayed in the list.
Expiry Type
7750 SR OS Services Guide
Aggr IP-Address
Description
Interface
State