Alcatel-Lucent 7750 SR OS Service Manual page 1412

OAM and SAA Command Reference
sub-profile sub-profile-name — Specifies an existing subscriber profile name. The subscriber profile
sla-profile sla-profile-name — Specifies an existing SLA profile name. The SLA profile is
vprn-ping
Syntax vprn-ping service-id source ip-address destination ip-address [fc fc-name [profile [in |
out]] [size size] [ttl vc-label-ttl] [return-control] [interval interval] [count send-count]
[timeout timeout]
Context <GLOBAL>
config>saa>test>type
Description
This command performs a VPRN ping.
Parameters
service service-id — The VPRN service ID to diagnose or manage.
source ip-address — The IP prefix for the source IP address in dotted decimal notation.
destination ip-address — The IP prefix for the destination IP address in dotted decimal notation.
fc-name — The forwarding class of the MPLS echo request encapsulation.
profile {in | out} — The profile state of the MPLS echo request encapsulation.
size octets — The OAM request packet size in octets, expressed as a decimal integer.
ttl vc-label-ttl — The TTL value in the VC label for the OAM request, expressed as a decimal
return-control — Specifies the response to come on the control plane.
interval interval — The interval parameter in seconds, expressed as a decimal integer. This
Page 1414
is configured in the config>subscr-mgmt>sub-profile context.
configured in the config>subscr-mgmt>sla-profile context.
Values
1 — 2147483647
Values
0.0.0.0 — 255.255.255.255
Values
0.0.0.0 — 255.255.255.255
Default
be
Values
be, l2, af, l1, h2, ef, h1, nc
Default
out
Values
1 — 65535
integer.
Default
255
Values
1 — 255
parameter is used to override the default request message send interval and defines the minimum
amount of time that must expire before the next message request is sent.
7750 SR OS Services Guide