List Of Commands - Alcatel-Lucent 7750 SR OS Service Manual

Configuring an IES Service with CLI

List of Commands

Table 23
each command is implemented with a short command description. The command list is organized
in the following task-oriented manner:
• Create an IP address range reserved for IES
• Configure IES service parameters
• Configure SAP parameters
Table 1: CLI Commands to Configure IES Service Parameters
s
Command
Create an IP address range reserved for IES
config>router
service-prefix
Configure IES service parameters
config>service
ies
customer
no shutdown
Configure IES subscriber interface parameters
config>service>ies>sub-if
address
dhcp
group-interface
Page 682
lists all the service configuration commands indicating the configuration level at which
→
Configure IES subscriber interface parameters on page 682
→
Configure IES subscriber interface group interface parameters on page 683
→
Configure interface parameters
−
Configure IES interface ICMP parameters
−
Configure IES interface IPv6 parameters
−
Configure IES interface spoke-SDP parameters
−
Configure VRRP parameters
→
Configure SAP ATM parameters
Creates an IP address range reserved for IES to provide a mechanism to
reserve one or more address ranges for services.
Creates an IES service instance and specifies the customer ID number to
be associated with the service.
Specifies the customer ID number to be associated with the service.
Administratively enables the service.
Assigns an IP address, IP subnet, and broadcast address format to an IES
IP router interface.
Configures DHCP parameters for the subscriber interface.
Enables the context to configure a group interface.
Description
7750 SR OS Services Guide
Page
691
719
720
717
729
742