Deleting A Spoke-Sdp - Alcatel-Lucent 7750 SR OS Service Manual

Deleting a Spoke-SDP

To delete the spoke SDP from the service interface must be shut it first. This cleans up the
associated VC labels.
Use the following CLI syntax to delete a spoke SDP from an interface:
CLI Syntax: config>service# ies service-id [customer customer-id] [vpn
vpn-id]
Example:
The following example displays the spoke SDP configuration.
A:ALA-48>config>service>ies# info
----------------------------------------------
----------------------------------------------
A:ALA-48>config>service>ies#
7750 SR OS Services Guide
interface ip-int-name
[no] spoke-sdp sdp-id:vc-id
shutdown
config>service# ies 1001
config>service>ies# interface "spokeSDP-test"
config>service>ies>if# spoke-sdp 2:100
config>service>ies>if>spoke-sdp# shutdown
config>service>ies>if>spoke-sdp# exit
config>service>ies>if# no spoke-sdp 2:100
config>service>ies>if# exit
description "to internet"
interface "spokeSDP-test" create
exit
no shutdown
Internet Enhanced Services
Page 701