Description
Display the status of the DHCP relay and DHCP snooping functions on each interface.
Output
Show DHCP Summary Output — The following table describes the output fields for DHCP
summary.
Sample Output
A:ALA-49# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name
-------------------------------------------------------------------------------
Sector A
grp-if
ies-test
test
test1
test2
testA
testB
to-HQ
to-web
-------------------------------------------------------------------------------
Interfaces: 10
===============================================================================
A:ALA-49#
7750 SR OS Services Guide
Label
Interface Name
SapId/Sdp
Arp Populate
Used/Provided
Info Option
Admin State
SapId/Sdp
sap:7/1/1.2.2
sap:9/1/2:0/500
sap:10/1/2:0
sap:7/1/1.1.2
sap:7/1/1.2.1
sap:7/1/3.1.1
sap:7/1/5.1.1
sdp:spoke-2:1001
sap:2/1/10:50
Name of the router interface.
Specifies the associated SAP ID or SDP ID.
Specifies whether or not ARP populate is enabled.
Used — The number of lease-states that are currently in use on a spe-
cific interface, that is, the number of clients on that interface got an IP
address by DHCP. This value is always less than or equal to the 'Pro-
vided' field.
Provided — The lease-populate value that is configured for a spe-
cific interface.
Indicates whether Option 82 processing is enabled on the interface.
Indicates the administrative state.
Arp
Used/
Populate Provided
No
0/0
0/0
No
0/1
No
0/0
0/0
No
0/0
0/0
No
0/0
0/0
No
0/0
0/0
No
0/0
0/0
No
0/0
0/0
No
0/0
0/0
No
0/0
0/0
Internet Enhanced Services
Description
Info
Option
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Page 847
Admin
State
Up
Down
Up
Up
Up
Up
Up
Up
Up
Up