Alcatel-Lucent 7750 SR OS Service Manual page 1157

ieee-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
sub-profile sub-profile-name — Specifies an existing subscriber profile name to be associated with
sla-profile sla-profile-name — Specifies an existing SLA profile name to be associated with the
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler.
aggregate
Syntax aggregate [active]
Context show>router
Description
This command displays aggregated routes.
Parameters
active — This keyword filters out inactive aggregates.
Output Show Aggregate Output Fields — The following table describes router aggregate output fields.
Sample Output
7750 SR OS Services Guide
Values
Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with
support of /30 subnets).
mask: 1 — 32
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-
profile context.
static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile
context.
Values
1 — 2147483647
Label
Prefix
Summary
AS Set
Aggr AS
Aggr IP-Address
State
No. of Aggregates
Virtual Private Routed Network Services
Displays the destination address of the aggregate route in dotted
decimal notation.
Specifies whether the aggregate or more specific components are
advertised.
Displays an aggregate where the path advertised for the route con-
sists of all elements contained in all paths that are being summarized.
Displays the aggregator path attribute to the aggregate route.
The IP address of the aggregated route.
The operational state of the aggregated route.
The total number of aggregated routes.
Description
Page 1157