Modifying A Remote Mirrored Service - Alcatel-Lucent 7750 SR OS Service Manual

Service Management Tasks

Modifying a Remote Mirrored Service

Existing mirroring parameters can be modified in the CLI. The changes are applied immediately.
The service must be shut down if changes to the SAP are made. Refer to
complete list of commands and options.
In the following example, the mirror destination is changed from 10.10.10.2 (ALA-B) to
10.10.10.3 (SR3). Note that the mirror-dest service ID on ALA-B must be shut down first before it
can be deleted.
The following example displays commands to modify parameters for a remote mirrored service.
Example
*A:ALA-A>config>mirror# info
----------------------------------------------
SR3>config>mirror# info
----------------------------------------------
Page 1338
:
*A:ALA-A>config>mirror# mirror-dest 104
config>mirror>mirror-dest# remote-source
config>mirror>mirror-dest>remote-source# no far-end 10.10.10.2
remote-source# far-end 10.10.10.3 ing-svc-label 3500
*A:ALA-B>config>mirror# mirror-dest 104
config>mirror>mirror-dest# shutdown
config>mirror>mirror-dest# exit
config>mirror# no mirror-dest 104
SR3>config>mirror# mirror-dest 104 create
config>mirror>mirror-dest# sdp 4 egr-svc-label 3500
config>mirror>mirror-dest# no shutdown
config>mirror>mirror-dest# exit all
SR3># debug
debug# mirror-source 104
debug>mirror-source# port 5/1/2 ingress egress
debug>mirror-source# no shutdown
mirror-dest 104 create
remote-source
far-end 10.10.10.3 ing-svc-label 3500
exit
sap 2/1/15:0 create
egress
qos 1
exit
exit
no shutdown
exit
mirror-dest 104 create
sdp 4 egr-svc-label 3500
no shutdown
exit
page 1335
7750 SR OS Services Guide
for the