Alcatel-Lucent 7750 SR OS Service Manual page 894

Configuring a VPRN Service with CLI
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
advertise-inactive
aggregator-id-zero
as-override
authentication-key
cluster
connect-retry
damping
description
disable-client-reflect
disable-communities
disable-fast-external-
failover
export
hold-time
import
keepalive
local-address
local-as
local-preference
loop-detect
med-out
min-as-origination
min-route-
advertisement
Page 894
Enables the advertising of inactive BGP routers to other BGP peers.
Enables setting the router ID to zero in the aggregator path attribute
when BGP is aggregating routes.
Replaces all instances of the peer's AS number with the local AS
number in a BGP route's AS_PATH.
Enables MD5 authentication and configures the authentication key.
Configure the cluster ID for a route reflector server.
Configures the BGP Connect Retry timer value in seconds.
Enables BGP route damping for learned routes as defined within the
route policy.
Creates a text description stored in the configuration file for a
configuration context.
Disables route reflection by the route reflector to clients in the group.
Specifies BGP to disable sending communities.
Configures BGP fast external failover.
Specifies the export route policy to be used for determining which
routes are advertised to peers.
Configures the BGP Hold Time in seconds.
Specifies the import route policy to be used for determining which
routes are accepted from peers.
Configures the BGP keepalive timer in seconds. A keepalive message
is sent every time this timer expires.
Configures the local IP address used by the group or neighbor when
communicating with BGP peers.
Adds a BGP virtual AS number.
Enables setting the BGP local-preference attribute in incoming routes
if not specified and configures the default value for the attribute.
Configures how the BGP peer session handles loop detection in the AS
Path.
Enables advertising the Multi-Exit Discriminator (MED) and assigns
the value used for the path attribute for the MED advertised to BGP
Peers if the MED is not already set.
Configures the minimum interval in seconds at which a given path
attribute, originated by the local router, can be advertised to a peer.
Configures the minimum interval in seconds at which a given prefix
can be advertised to a peer.
Description
7750 SR OS Services Guide
Page
1063
1063
1064
1065
1066
1066
1067
952
1067
1068
1068
1068
1070
1070
1071
1072
1072
1073
1073
1074
1075
1075