Alcatel-Lucent 7750 SR OS Service Manual page 760

IES Service Configuration Commands
seconds — Specifies the time frame in seconds that is used to limit the number of version 6 redirects
time-exceeded
Syntax time-exceeded [number seconds]
no time-exceeded
Context config>service>ies>if>ipv6>icmp6
Description
This command specifies whether "time-exceeded" ICMP messages should be sent. When enabled,
ICMPv6 "time-exceeded" messages are generated by this interface.
When disabled, ICMPv6 "time-exceeded" messages are not sent.
Default
100 10
number — Specifies the number of "time-exceeded" ICMP messages are to be issued in the time
seconds — Specifies the time frame in seconds that is used to limit the number of "time-exceeded"
unreachables
Syntax unreachables [number seconds]
no unreachables
Context config>service>ies>if>ipv6>icmp6
Description
This command specifies that ICMPv6 host and network unreachable messages are generated by this
interface.
When disabled, ICMPv6 host and network unreachable messages are not sent.
Default
100 10
number — Specifies the number of destination unreachable ICMPv6 messages are issued in the time
seconds — Specifies the time frame in seconds that is used to limit the number of destination
Page 760
issued.
Values
1 — 60
Default
10
frame specified by the seconds parameter.
Values
10 — 1000
Default
100
ICMP message to be issued.
Values
1 — 60
Default
10
frame specified by the seconds parameter.
Values
10 — 1000
Default
100
unreachable ICMPv6 messages to be issued.
7750 SR OS Services Guide