Alcatel-Lucent 7750 SR OS Service Manual page 838

IES Service Configuration Commands
ip-int-name — The IP interface name for which to display information.
family — Displays the router IP interface table to display.
interface-type — Specifies to display either group or subscriber interfaces.
detail — Displays detailed IP interface information.
Output Show Service-ID ARP — The following table describes show service-id ARP output fields:
Page 838
Values
32 characters maximum
Values
ipv4 — Displays only those peers that have the IPv4 family enabled.
ipv6 — Displays the peers that are IPv6-capable.
Values
group, subscriber
Default
IP interface summary output.
Label
Interface-Name
Type
IP-Address
Adm
Opr
Interface
If Name
Admin State
Oper State
IP Addr/mask
Details
If Index
If Type
Port Id
SNTP B.Cast
Arp Timeout
MAC Address
ICMP Mask Reply
x: [0 — FFFF]H
d: [0 — 255]D
The name used to refer to the IES interface.
Specifies the interface type.
Specifies the IP address/IP subnet/broadcast address of the interface
The desired state of the interface.
The operating state of the interface.
The name used to refer to the interface.
The desired state of the interface.
The operating state of the interface.
Specifies the IP address/IP subnet/broadcast address of the interface.
The index corresponding to this IES interface. The primary index is 1;
i.e., all IES interfaces are defined in the Base virtual router context.
Specifies the interface type.
Specifies the SAP's port ID.
Specifies whether SNTP broadcast client mode is enabled or disabled.
Specifies the timeout for an ARP entry learned on the interface.
Specifies the 48-bit IEEE 802.3 MAC address.
Specifies whether ICMP mask reply is enabled or disabled.
7750 SR OS Services Guide
Description