Alcatel-Lucent 7750 SR OS Service Manual page 584

VPLS Service Configuration Commands
base
Context show>service>id
show>service>id>igmp-snooping
Description
Displays basic information about the service ID including service type, description, SAPs and SDPs.
Output Show Service-ID Base — The following table describes show service-id base output fields:
Page 584
Label
Service Id The service identifier.
Specifies the VPN ID assigned to the service.
Vpn Id
The type of service: Epipe, IES, VPLS, VPRN, Mirror, Apipe, Fpipe, Ipipe
Service Type
Generic information about the service.
Description
Customer Id The customer identifier.
The date and time of the most recent management-initiated change to this
Last Mgmt
Change
customer.
The desired state of the service.
Adm
Oper The operating state of the service.
The largest frame size (in octets) that the service can handle.
Mtu
This object is only valid in services that accept mesh SDP bindings. It is
Def. Mesh VC Id
used to validate the VC ID portion of each mesh SDP binding defined in
the service.
The number of SAPs defined on the service.
SAP Count
The number of SDPs bound to the service.
SDP Bind Count
Specifies the service access (SAP) and destination (SDP) points.
Identifier
Type Specifies the signaling protocol used to obtain the ingress and egress labels
used in frames transmitted and received on the SDP.
Specifies the desired largest service frame size (in octets) that can be
AdmMTU
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
Specifies the actual largest service frame size (in octets) that can be
OprMTU
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
The operating state of the SDP.
Opr
Description
7750 SR OS Services Guide