Alcatel-Lucent 7750 SR OS Service Manual page 1190

VPRN Service Configuration Commands
Page 1190
Label
Neighbor
Description
Primary IP
Group
Admin State
Oper State
Send Mode
Recv Mode
Metric In
Metric Out
Split Horizon
Check Zero
The RIP neighbor name.
The RIP neighbor description.
cates no description is configured.
The RIP neighbor interface primary IP address.
The RIP group name of the neighbor interface.
Down — The RIP neighbor interface is administratively down.
Up — The RIP neighbor interface is administratively up.
Down — The RIP neighbor interface is operationally down.
Up — The RIP neighbor interface is operationally up.
Bcast — Specifies that RIPv2 formatted messages are sent to the
broadcast address.
Mcast — Specifies that RIPv2 formatted messages are sent to the
multicast address.
None — Specifies that no RIP messages are sent (i.e., silent listener).
RIPv1 — Specifies that RIPv1 formatted messages are sent to the
broadcast address.
Both — Specifies that RIP updates in either version 1 or version 2
format will be accepted.
None — Specifies that RIP updates will not be accepted.
RIPv1 — Specifies that RIP updates in version 1 format only will be
accepted.
RIPv2 — Specifies that RIP updates in version 2 format only will be
accepted.
The metric value added to routes received from a RIP neighbor.
The value added to routes exported into RIP and advertised to RIP
neighbors.
Disabled — Split horizon disabled for the neighbor.
Enabled — Split horizon and poison reverse enabled for the neigh-
bor.
Disabled — Checking of the mandatory zero fields in the RIPv1
and RIPv2 specifications are not checked allowing receipt of RIP mes-
sages even if mandatory zero fields are non-zero for the neighbor.
Enabled — checking of the mandatory zero fields in the RIPv1 and
RIPv2 specifications and rejecting non-compliant RIP messages is
enabled for the neighbor.
7750 SR OS Services Guide
Description
No Description Available
indi-