Alcatel-Lucent 7750 SR OS Service Manual page 1329

The following displays the mirror destination, which is on ALA-A, configuration for mirror
service 1216. This configuration specifies that the mirrored traffic coming from the mirror source
(10.10.0.91) is to be directed to SAP 4/1/58 and states that the service only accepts traffic from far
end 10.10.0.92 (ALA-B) with an ingress service label of 5678. When a forwarding class is
specified, then all mirrored packets transmitted to the destination SAP or SDP override the default
(be) forwarding class. The slice size limits the size of the stream of packet through the 7750 SR
and the core network.
Mirror
Destination
SAP 4/1/58:0
Sniffer
The following example displays the CLI commands to configure remote mirrored service 1216.
The traffic ingressing and egressing port 1/1/60 on 10.10.0.92 (ALA-B) will be mirrored to the
destination SAP 4/1/58:0 on ALA-A.
Example: *A:ALA-A>config>mirror# mirror-dest 1216 create
7750 SR OS Services Guide
Remote
Source
System IP
10.10.0.92/32
ALA-A
Figure 4: Remote Mirrored Service Tasks
config>mirror>mirror-dest$ description "Receiving mirrored
config>mirror>mirror-dest# sap 1/1/14:0 create
config>mirror>mirror-dest>sap$ exit
config>mirror>mirror-dest# no shutdown
config>mirror>mirror-dest# remote-source
config>mirror>mirror-dest>remote-source# far-end
config>mirror>mirror-dest>remote-source# exit
Destination
SDP 4
System IP
10.10.0.91/32
SDP 4
ALA-B
traffic from .91"
10.10.0.91 ing-svc-label 5678
Mirror Services
Mirror
Source
Port 1/1/60 ingress/egress
OSSG030
Page 1331