Show Commands - Alcatel-Lucent 7750 SR OS Service Manual

OAM and SAA Command Reference

Show Commands

saa
Syntax saa [test-name] [owner test-owner]
Context show>saa
Description
Use this command to display information about the SAA test.
If no specific test is specified a summary of all configured tests is displayed.
If a specific test is specified then detailed test results for that test are displayed for the last three
occurrences that this test has been executed, or since the last time the counters have been reset via a
system reboot or clear command.
Parameters
test-name — Enter the name of the SAA test for which the information needs to be displayed. The
owner test-owner — Specifies the owner of an SAA operation up to 32 characters in length.
Output SAA Output — The following table provides SAA field descriptions
Sample Output
The following displays an SAA test result:
*A:SR-3>config>saa>test$ show saa
Page 1460
test name must already be configured in the config>saa>test context.
This is an optional parameter.
Values
32 characters maximum.
Default
If a test-owner value is not specified, tests created by the CLI have a default owner
"TiMOS CLI".
Label
Test Name
Owner Name
Administrative
status
Test type
Test runs since
last clear
Number of failed
tests run
Last test run
The name of the test.
The owner of the test.
Enabled or disabled.
The type of test configured.
The total number of tests performed since the last time the tests were
cleared.
The total number of tests that failed.
The last time a test was run.
7750 SR OS Services Guide
Description