Alcatel-Lucent 7750 SR OS Service Manual page 1153

For. InProf
For. OutProf
,,,
-------------------------------------------------------------------------------
ATM SAP Configuration Information
-------------------------------------------------------------------------------
Ingress TD Profile : 1 Egress TD Profile : 1
Alarm Cell Handling: Enabled AAL-5 Encap : VC-MUX
-------------------------------------------------------------------------------
...
=============================================================================
*A:ALA-12#
sdp
Syntax sdp [sdp-id | far-end ip-addr] [detail]
Context show>service>id
Description
Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id — Displays only information for the specified SDP ID.
far-end ip-addr — Displays only SDPs matching with the specified far-end IP address.
detail — Displays detailed SDP information.
Output Show Service-ID SDP — The following table describes show service-id SDP output fields:
7750 SR OS Services Guide
: 0
: 0
Default
All SDPs.
Values
1 — 17407
Default
SDPs with any far-end IP address.
Label
The SDP identifier.
Sdp Id
Indicates whether the SDP is a spoke or a mesh.
Type
Name of the split horizon group that the SDP belongs to.
Split Hori-
zon Group
Displays the VC type: ether, vlan, or vpls.
VC Type
VC Tag Displays the explicit dot1Q value used when encapsulating to the SDP far
end.
The VC label used by the far-end device to send packets to this device in
I. Lbl
this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU (when
Admin Path
MTU
one is set) or the dynamically computed tunnel MTU, when no admin path
MTU is set (the default case.)
Virtual Private Routed Network Services
0
0
Description
Page 1153