Alcatel-Lucent 7750 SR OS Service Manual page 1058

VPRN Service Configuration Commands
bsr-candidate
Syntax bsr-candidate
Context config>service>vprn>pim>rp
Description
This command enables the context to configure a local rendezvous point (RP) of a PIM protocol
instance.
Default
Enabled when PIM is enabled.
address
Syntax [no] address ip-address
Context config>service>vprn>pim>rp>bsr-candidate
config>service>vprn>pim>rp>rp-candidate
Description
This command configures a static bootstrap or rendezvous point (RP) as long as the source is not
directly attached to this router.
Use the no form of this command to remove the static RP from the configuration.
Default
No IP address is specified.
Parameters
ip-address — The static IP address of the RP. The ip-address portion of the address command
hash-mask-len
Syntax hash-mask-len hash-mask-length
no hash-mask-len
Context config>service>vprn>pim>rp>bsr-candidate
Description
This command is used to configure the length of a mask that is to be combined with the group address
before the hash function is called. All groups with the same hash map to the same RP. For example, if
this value is 24, only the first 24 bits of the group addresses matter. This mechanism is used to map
one group or multiple groups to an RP.
Parameters
hash-mask-length — The hash mask length.
priority
Syntax priority bootstrap-priority
Page 1058
specifies the IP host address that will be used by the IP interface within the subnet. This address
must be unique within the subnet and specified in dotted decimal notation.
Values
1.0.0.0 – 223.255.255.255
Values
0 — 32
7750 SR OS Services Guide