Alcatel-Lucent 7750 SR OS Service Manual page 1180

VPRN Service Configuration Commands
summary
Syntax summary [all]
Context show>router>bgp
Description
This command displays a summary of BGP neighbor information.
If confederations are not configured, that portion of the output will not display.
The "State" field displays the global BGP operational state. The valid values are:
Parameters
all — Displays BGP peers in all instances.
Output Show BGP Summary Output — The following table describes the command output fields for a
BGP summary:
Page 1180
Up - BGP global process is configured and running.
Down - BGP global process is administratively shutdown and not running.
Disabled - BGP global process is operationally disabled. The process must be restarted by the
operator.
For example, if a BGP peer is operationally disabled, then the state in the summary table shows
the state 'Disabled'
Label
BGP Router ID The local BGP router ID.
The configured autonomous system number.
AS
The configured local AS setting, if not configured it is the same as the
Local AS
system AS.
BGP Admin State Down — BGP is administratively disabled.
Up — BGP is administratively enabled.
Down — BGP is operationally disabled.
BGP Oper State
Up — BGP is operationally enabled.
The configured confederation AS.
Confederation AS
The configured members of the BGP confederation.
Member Confeder-
ations
The total number of configured BGP peer groups.
Number of Peer
Groups
The total number of configured BGP peers.
Number of Peers
The total number of BGP routes used in the forwarding table.
Total BGP Active
Routes
The total number of BGP routes learned from BGP peers.
Total BGP Routes
Description
7750 SR OS Services Guide