Service Mirror Configuration Components - Alcatel-Lucent 7750 SR OS Service Manual

Service Mirror Configuration Components

Figure 66
•
•
•
•
•
•
•
7750 SR OS Services Guide
displays the major components to configure service mirroring.
CONFIGURE
MIRROR DESTINATION SERVICE-ID
SAP
SDP (for remote mirrored service)
REMOTE SOURCE (for remote mirrored service)
DEBUG
MIRROR SOURCE SERVICE-ID
PORT
SAP
IP FILTER
MAC FILTER
INGRESS LABEL
Figure 6: Service Mirroring Configuration Components
Mirror destination — Sets up a service which allows the mirrored packets to be directed
locally or over the core of the network and have a far end 7750 SR decode the mirror
encapsulation. The service ID must match in the mirror-destination and the mirror-source
context.
SAP (mirror destination) — Creates a service access point (SAP), which defines the port
and encapsulation parameters to which the mirrored source packets are sent. The sniffer is
physically connected to this port.
SDP For remote mirrored service. Binds an existing (mirror) service distribution path
—
(SDP) to the mirror destination service ID to transport the source mirrored traffic to the
destination.
Remote source — For remote mirrored services. Specifies the remote (source) device
allowed to mirror traffic to this device for mirror service egress.
Mirror source — Configures packet mirroring match criteria for a mirror destination
service. The same mirror destination service ID and the mirror source service ID must be
configured.
Port — A packet mirroring option which defines ingress and/or egress traffic monitoring
by port.
SAP (mirror source) — A packet mirroring option which defines ingress and/or egress
traffic monitoring by SAP defined by the SAP ID.
Mirror Services
Page 1305