Alcatel-Lucent 7750 SR OS Service Manual page 1273

no cca-rate
Context config cca>ccag ccag-id
Description
This command defines a maximum forwarding rate for each CCA member within the CCAG. Support
of setting a maximum CCA forwarding rate is provided to prevent overrunning the ingress
forwarding plane when sub-line rate ingress features are enabled. The primary ingress feature
requiring this support is dual ingress access queuing. When dual ingress queuing is enabled on cross
connect SAPs, the CCA forwarding rate should be limited to a rate that prevents packet loss due to
ingress forwarding congestion. The specified cca-rate limit is applied to the aggregate alpha and beta
path bandwidth.
The no form of the command removes CCA bandwidth rate limiting.
Parameters
kilobits-per-second — Defines the maximum CCA rate in kilobits per second. The actual Kilobits per
member-cca
Syntax [no] member-cca card-slot/mda-number
Context config>vsm>ccag ccag-id
Description
This command adds and deletes provisioned CCAs from the CCAG. The only requirement to defining
a CCA member is that the defined MDA position be provisioned as type cca. A CCA does not need to
be populated in the defined MDA position prior to membership definition. A non-populated CCA
member is considered inactive from a CCAG perspective. A populated CCA member will become
active once it has been initialized by the system. A CCA member may be removed from the CCAG or
depopulated from MDA slot at any time. At least one member CCA must be active on the CCAG for
the CCAG to be placed in the operational state. Up to 8 member CCAs can be configured per CCAG.
The no form of the command removes a CCA member from the CCAG. If the CCA does not exist or
is not currently a member of the CCAG, no error is returned. Once removed from the CCAG, all
forwarding through the specified CCA stops.
Parameters
card-slot/mda-number — Identifies the system MDA slot that is will be added as a member CCA for
card-slot — Defines the IOM slot the provisioned CCA is or will be populated. It is separated from
mda-position — The mda-position portion of the parameter defines the MDA slot number on the IOM
7750 SR OS Services Guide
second rate is rounded up to the nearest 50Mbps increment.
Values
0 — 100000000, max
Default
max
the CCAG. The specified MDA slot must have been pre-provisioned as type cca for the
membership command to be successful.
the following mda-position portion of the parameter by a forward slash (/).
Values
1 through 10 (chassis type dependent)
the CCA is or will be populated. It must be separated from the preceding card-slot portion of the
parameter by a forward slash (/).
Values
1 or 2 (IOM type dependent)
Versatile Service Module
Page 1275