Alcatel-Lucent 7750 SR OS Service Manual page 567

Number of SAPs : 2
-------------------------------------------------------------------------------
===============================================================================
A:ALA-701#
sdp
Syntax sdp [sdp-id | far-end ip-addr] [detail]
Context show>service>id
Description
Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id — Displays only information for the specified SDP ID.
far-end ip-addr — Displays only SDPs matching with the specified far-end IP address.
detail — Displays detailed SDP information.
Output Show Service-ID SDP — The following table describes show service-id SDP output fields:
7750 SR OS Services Guide
Default
All SDPs.
Values
1 — 17407
Default
SDPs with any far-end IP address.
Label
Sdp Id The SDP identifier.
Indicates whether the SDP is a spoke or a mesh.
Type
Name of the split horizon group that the SDP belongs to.
Split Horizon
Group
Displays the VC type, ether, vlan, or vpls.
VC Type
Displays the explicit dot1Q value used when encapsulating to the SDP far
VC Tag
end.
The VC label used by the far-end device to send packets to this device in
I. Lbl
this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU (when
Admin Path MTU
one is set) or the dynamically computed tunnel MTU, when no admin path
MTU is set (the default case.)
The actual largest service frame size (in octets) that can be transmitted
Oper Path MTU
through this SDP to the far-end router, without requiring the packet to be
fragmented.
Far End Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
Specifies the type of delivery used by the SDP: GRE or MPLS.
Delivery
Virtual Private LAN Services
Description
Page 567