Configuring VPRN Components
This section provides VPRN configuration examples for the following entities:
•
•
•
•
•
•
•
•
VPRN parameters
Creating a VPRN Service
Use the following CLI syntax to create a VRPN service. A route distinguisher must be defined in
order for VPRN to be operationally active.
CLI Syntax: config>service# vprn service-id [customer customer-id]
Example
The following example displays the VPRN service creation output.
*A:ALA-1>config>service# info
----------------------------------------------
...
...
----------------------------------------------
*A:ALA-1>config>service>vprn#
7750 SR OS Services Guide
Creating a VPRN Service on page 903
Configuring Global VPRN Parameters
Configuring VPRN Protocols - PIM
Configuring Router Interfaces
Configuring VPRN Protocols - OSPF
Configuring a VPRN Interface SAP
Configuring VPRN Protocols - BGP
Configuring VPRN Protocols - RIP
route-distinguisher [ip-address:number1 | asn:number2]
description description-string
no shutdown
:
config>service# vprn 1 customer 1 create
config>service>vprn# route-distinguisher 10001:0
config>service>vprn# no shutdown
vprn 1 customer 1 create
route-distinguisher 10001:0
no shutdown
exit
Virtual Private Routed Network Services
Page 903