Alcatel-Lucent 7750 SR OS Service Manual page 1168

VPRN Service Configuration Commands
Output Standard and Detailed Neighbor — The following table describes the standard and detailed
command output fields for a BGP neighbor:
Page 1168
Label
Peer
Group
Peer AS
Peer Address
Peer Port
Local AS
Local Address
Local Port
Peer Type
State
Last State
The IP address of the configured BGP peer.
The BGP peer group to which this peer is assigned.
The configured or inherited peer AS for the peer group.
The configured address for the BGP peer.
The TCP port number used on the far-end system.
The configured or inherited local AS for the peer group.
The configured or inherited local address for originating peering for
the peer group.
The TCP port number used on the local system.
External — Peer type configured as external BGP peers.
Internal — Peer type configured as internal BGP peers.
Idle — The BGP peer is not accepting connections.
Active — BGP is listening for and accepting TCP connections
from this peer.
Connect — BGP is attempting to establish a TCP connection from
this peer.
Open Sent — BGP has sent an OPEN message to the peer and is
waiting for an OPEN message from the peer.
Open Confirm — BGP has received a valid OPEN message
from the peer and is awaiting a KEEPALIVE or NOTIFICATION.
Established — BGP has successfully established a peering and
is exchanging routing information.
Idle — The BGP peer is not accepting connections.
Active — BGP is listening for and accepting TCP connections
from this peer.
Connect — BGP is attempting to establish a TCP connection with
this peer.
Connect — BGP is attempting to establish a TCP connections
from this peer.
Open Sent — BGP has sent an OPEN message to the peer and is
waiting for an OPEN message from the peer.
Open Confirm — BGP has received a valid OPEN message
from the peer and is awaiting a KEEPALIVE or NOTIFICATION.
7750 SR OS Services Guide
Description