Alcatel-Lucent 7750 SR OS Service Manual page 1289

sap
Syntax sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id [create]
no sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id
Context config>service>ies>interface
Description
This command creates a cross connect SAP on the ccag-id referenced in the IES service. A CCAG
SAP is identified by four items; the ccag-id, the CCAG path, the pairing type and the cc-id. A CCAG
SAP on an IES IP interface supports all the available QoS, filtering and accounting features as an IES
IP interface Dot1Q SAP.
The no form of the command removes a SAP from the IES service IP interface context. Once
removed, all information and resources concerning the SAP is deleted from the system including the
CCAG cc-id in use on the CCA path.
Parameters
ccag — The ccag portion of the SAP identifier is required and specifies that the ies SAP is of the
-ccag-id — The ccag-id portion of the SAP identifier is required and specifies which ccag-id on
.a | .b — The .a and .b portion of the CCAG SAP identifier is required and is used to define the CCA
.sap-sap — The .sap-sap portion of the CCAG SAP identifier is optional and is used to explicitly
7750 SR OS Services Guide
will be created if it does not already exist or if it does exist, the CLI context will change to the
specified CCAG SAP.
When the system environment variable create is disabled (using the no create command), the
system will not require the create keyword when creating a CCAG SAP. In the event that the sap
command is issued with a CCAG SAP identifier that previously had not been created, that
CCAG SAP will be created.
Once a CCAG SAP has been created, the create keyword is ignored when a sap command is
executed with that CCAG SAP identifier and the CLI context will change to the specified CCAG
SAP.
CCAG type.
which the SAP must be created. The specified ccag-id must exist on the system or the SAP
creation will fail. The leading dash must be included as a separator between ccag and the ccag-id.
Values
-1 (dash 1) to -8 (dash 8)
Default
None
bandwidth path with will be associated with the SAP. The path association must be specified and
.a and .b are mutually exclusive. The .a designation identifies the SAP as being on the Alpha path
and the .b designation identifies the SAP as being on the Beta path. The paired SAP or network
IP interface using the same cc-id as the SAP must be associated with the opposite path. The
leading period must be included as a separator between the ccag-id and the path designator.
Values
.a or .b
Default
None
define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the cross
connect object sharing the same cc-id on the opposite path is a CCAG SAP. A cross connection
between an IES CCAG SAP and a network IP interface is not currently allowed. If .sap-sap is not
Versatile Service Module
Page 1291