Basic Mirroring Configuration - Alcatel-Lucent 7750 SR OS Service Manual

Basic Mirroring Configuration

Basic Mirroring Configuration
Destination mirroring parameters must include at least:
•
•
Mirror source parameters must include at least:
•
•
The following example displays a sample configuration of a local mirrored service where the
source and destinations are on the same device (ALA-A).
*A:ALA-A>config>mirror# info
----------------------------------------------
----------------------------------------------
*A:ALA-A>config>mirror#
The following displays the mirror source configuration:
*A:ALA-A>debug>mirror-source# show debug mirror
debug
mirror-source 103
exit
exit
*A:ALA-A>debug>mirror-source# exit
Page 1316
A mirror destination ID (same as the mirror source service ID).
A mirror destination SAP or SDP.
A mirror service ID (same as the mirror destination service ID).
At least one source type (port, SAP, ingress label, IP filter or MAC filter) specified.
mirror-dest 103 create
sap 2/1/25:0 create
egress
qos 1
exit
exit
no shutdown
exit
port 2/1/24 egress ingress
no shutdown
7750 SR OS Services Guide