Alcatel-Lucent 7750 SR OS Service Manual page 1211

dhcp
Syntax dhcp
Context clear>router>dhcp
Description
This command enables the context to clear DHCP parameters.
lease-state
Syntax lease-state
lease-state ip-address ip-address
lease-state mac ieee-address
lease-state sap sap-id
lease-state sdp sdp-id:vc-id
Context clear>service>id>dhcp
Description
Clears DHCP lease state information for this service.
Parameters
ip-address — The IP address of the IP interface. The ip-address portion of the address command
ieee-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
7750 SR OS Services Guide
bpgrp-id:
ccag-id
lag-id
qtag1
qtag2
vpi
vci
dlci
specifies the IP host address that will be used by the IP interface within the subnet. This address
must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP
addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /30 subnets).
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
Virtual Private Routed Network Services
bundle-num 1 — 128
bpgrp-type-bpgrp-num
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id
lag keyword
id 1 — 200
0 — 4094
*, 0 — 4094
NNI 0 — 4095
UNI 0 — 255
1, 2, 5 — 65535
16 — 1022
Page 1211