Services Commands - Alcatel-Lucent 7750 SR OS Service Manual

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

VSM Configuration Commands

Services Commands

sap
Syntax
sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id [create]
no sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id
Context
config>service>epipe
Description
This command creates a cross connect SAP on the ccag-id referenced in the Epipe service. A CCAG
SAP is identified by four items; the ccag-id, the CCAG path, the pairing type and the cc-id. An Epipe
CCAG SAP supports all the available QoS, filtering and accounting features as an Epipe Dot1Q SAP.
The no form of the command removes a SAP from a service context. Once removed, all information
and resources concerning the SAP is deleted from the system including the CCAG cc-id in use on the
CCA path.
Parameters
ccag — The ccag portion of the SAP identifier is required and specifies that the epipe SAP is of the
-ccag-id — The ccag-id portion of the SAP identifier is required and specifies which ccag-id on
.a | .b — The .a and .b portion of the CCAG SAP identifier is required and is used to define the CCA
.sap-net — The .sap-net portion of the CCAG SAP identifier specifies that the SAP is of the SAP-2-
.sap-sap — The .sap-sap portion of the CCAG SAP identifier is mutually exclusive to .sap-sap and is
Page 1288
CCAG type.
which the SAP must be created. The specified ccag-id must exist on the system or the SAP
creation will fail. The leading dash must be included as a separator between ccag and the ccag-
id.
Values
-1 (dash 1) to -8 (dash 8)
Default
None
bandwidth path with will be associated with the SAP. The path association must be specified and
.a and .b are mutually exclusive. The .a designation identifies the SAP as being on the Alpha
path and the .b designation identifies the SAP as being on the Beta path. The paired SAP or
network IP interface using the same cc-id as the SAP must be associated with the opposite path.
The leading period must be included as a separator between the ccag-id and the path designator.
Values
.a or .b
Default
None
Net pairing type and is required when the cc-id is paired with a network IP interface. The pairing
type .sap-net is mutually exclusive with pairing type .sap-sap. If .sap-net is not specified, .sap-
sap is assumed and does not need to be included in the SAP identification. When specified, the
leading period must be used as a separator between the path designator and the pairing type.
Values
.sap-net or .sap-sap
Default
.sap-sap
used to define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the
cross connect object sharing the same cc-id on the opposite path is a CCAG SAP. If the other
cross connect object is a network IP interface, the pairing type must be defined as .sap-net. If
7750 SR OS Services Guide

Advertisement

Table of Contents
loading

Table of Contents