Alcatel-Lucent 7750 SR OS Service Manual page 891

Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command
Configure VPRN BGP parameters
config>service>vprn# bgp
advertise-inactive
aggregator-id-zero
always-compare-med
as-path-ignore
authentication-key
cluster
connect-retry
damping
description
disable-client-reflect
disable-communities
disable-fast-external-
failover
export
hold-time
ibgp-multipath
import
keepalive
local-as
local-preference
loop-detect
7750 SR OS Services Guide
Enables the advertising of inactive BGP routers to other BGP peers.
Enables setting the router ID to zero in the aggregator path attribute
when BGP is aggregating routes.
Determines how the Multi-Exit Discriminator (MED) path attribute is
used in the BGP route selection process.
Determines whether the AS path is used in determining the best BGP
route.
Enables MD5 authentication and configures the authentication key.
Configures the cluster ID for a route reflector server.
Configures the BGP Connect Retry timer value in seconds.
Enables BGP route damping for learned routes as defined within the
route policy.
Creates a text description for the BGP instance.
Disables the reflection of routes by the route reflector to the clients in
the given peer group.
Specifies BGP to disable sending communities.
Configures BGP fast external failover.
Specifies the export route policy to be used for determining which
routes are advertised to peers.
Configures the BGP Hold Time in seconds.
Allows BGP to use multiple BGP learned routes with different BGP
nexthops and also, to use ECMP routes to resolve the BGP nexthop
providing either load-balancing across the ECMP nexthops or install
the BGP route with all of the ECMP nexthops.
Specifies the import route policy to be used for determining which
routes are accepted from peers.
Configures the BGP keepalive timer in seconds.
Adds a BGP virtual AS number.
Enables setting the BGP local-preference attribute in incoming routes
if not specified and configures the default value for the attribute.
Configures how the BGP peer session will handle loop detection in the
AS Path.
Virtual Private Routed Network Services
Description Page
909
1063
1063
1064
1064
1065
1066
1066
1067
952
1067
1068
1068
1068
1070
1070
1070
1071
1072
1073
1073
Page 891